Propulsion for the world's toughest drones.
UAV motors, ESCs, propellers and power electronics, built under one roof. No design reaches our catalogue until it has run 1,000 hours on the bench and flown 100 without a crash.
About Us
One roof. One system. Motor, ESC and propeller are designed and built together, so a new motor goes from raw metal to prototype in 15 days.
Then we try to break it. Every new design runs on our thrust benches and flies on our own aircraft until it stops surprising us. Only then does it reach the catalogue. You buy on facts, not promises.
Products
One propulsion system. Every part engineered to work with the next.
Joint actuators and frameless motors, wound for your robot.
Actuators from 20 mm to 160 mm in diameter. Custom windings, shafts and housings for your torque, speed and envelope. Shipping to robot builders now.
Talk to an engineer →Hybrid power for long-endurance UAVs.
Starter-generators shipping now. IC engines in development.
Register interest →Our Vision
The world's next generation of drones and robots will need a propulsion partner it can trust. We are building it.
with Precision built for today, and possibility Engineered for tomorrow
If it doesn't exist yet, we build it.
Send us four numbers: all-up weight, motor count, battery voltage and target flight time. Our engineers reply with a matched motor, ESC and propeller set. 1,300+ custom motors delivered since 2025.
Don't take our word for it
Confidence you can check in five minutes.
ISO 9001:2015 by TÜV SÜD
Certificate 99 100 24407/01, checkable on TÜV SÜD's database. PRO series motors and ESCs qualified to MIL-STD-810G. AS9100D audit under way.
See certificates1,000 bench hours. 100 flight hours.
Every new design runs on thrust benches rated 5 to 150 kg, then flies 100 hours without a crash before it joins the catalogue. The results are published.
Compare motorsWarranty in writing
12 months on standard products, 24 months on custom motors, from delivery. Published terms, no fine print elsewhere.
Read warranty3 patents, 3 registered designs
Granted in India to Vector Technics and our group, covering damped BLDC motors, propeller designs and modular UAV engine systems.
Company informationSIDM Champion Award 2026
Import Substitution (Small Scale) category, for UAV motors, ESCs, propellers and power electronics designed and built in India.
See the announcementRuntime's 54-minute factory tour
Filmed in our Hyderabad facility: silicon-steel laminations, in-house winding, SMT, ESC flashing and the 100 kg thrust bench.
Watch on YouTubeCircuitDigest's India Tech Tour
Motors, ESCs, propellers, power distribution boards and DC-DC converters on the Shamshabad floor, designed and built under one roof.
Watch on YouTubeEvery story since 2023
Awards, press, factory tours and launches, each linked to where it was published.
See all coverage
Frequently Asked Questions
Straight answers for engineers and buyers.
Vector Technics is an Indian UAV propulsion company that designs and manufactures the complete propulsion stack in India: BLDC drone motors from FPV to heavy-lift (up to 100 kg of thrust per motor), ESCs, propellers, power distribution boards and BEC converters, plus robotic actuators and starter-generators. Indigenous by design, it builds motors, electronics and propellers under one roof, with capacity for 15,000+ motors a month, and supplies 200+ drone and robotics makers across 19+ countries.
Multiply your all-up weight by two and divide by the number of motors. That is the thrust each motor should deliver at full throttle, so the aircraft hovers at about half throttle. Match it against the test tables on our product pages, or send us your all-up weight, motor count, battery voltage and target flight time and our engineers will size the motor, ESC and propeller for you.
Every new motor design runs more than 1,000 hours on our thrust benches, rated from 5 kg to 150 kg, then flies 100 hours on our own test aircraft without a crash. Only then does it enter the catalogue. Its results are published on the product page: thrust, current, RPM, torque, power, efficiency in grams per watt and temperature, with the propeller, ESC, voltage and conditions used. Production units are checked in-process, including winding waveform tests and rotor balancing.
Yes. Our ESCs use sensorless BEMF control with PWM, DShot300 and DShot600 input, in 40 A 12S and 60 A 6S single versions with IP65 sealed housings, and a 4-in-1 board for multirotors. They are matched and tested with our motors, so one supplier stands behind the whole propulsion set.
Yes. We change windings, Kv, shafts, mounts and housings to fit your airframe or joint, starting with a feasibility review of your mission profile. We have delivered more than 1,300 custom motors since 2025. Send us your requirements and an engineer will reply with a proposal.
Vector Technics is ISO 9001:2015 certified by TÜV SÜD South Asia, certificate 99 100 24407/01, and AS9100D certification is in progress. Our PRO series motors and ESCs are qualified to MIL-STD-810G, and our group holds three granted Indian patents and three registered designs. Standard products carry a 12-month warranty and custom motors 24 months, from the date of delivery. Full terms are on our Warranty page.
